How To use AppleTV in Anatomy Lab

 

Step 1 - Set up your device to use Anat Lab Secure wifi

Android users please see instructions on http://accc.uic.edu/answer/how-do-i-connect-uic-wifi-using-android substituting the access point Anat Lab Secure where the instructions say UIC Wifi.

The steps below must be completed for iOS devices - EVEN IF you can already connect to UIC Wifi. 

While you have an Internet connection, on your iPhone, iPad, or iPod touch, open Safari and browse to this page and click this AnatLabWirelessSetup.mobileconfig link. You will be prompted to install the configuration profile:

Tap the Install button. The profile is unsigned, but it is from the College of Medicine. Read the Warning screen. Tap Install to continue.

install profile step 1     install profile step 2

Enter your passcode when prompted.

Enter your UIC netid as your username (example: adabyron) Tap Next.

Enter your ACCC common password as the password

Tap Next. Once the profile is installed, press the Home button and then tap the Settings icon.

For best results, we recommend setting Wi-Fi to Off, and then back to On.

 

Step 2 - Connect to the Anatomy Lab WiFi

Select Anat Lab Secure from the list of wireless networks. You should not be prompted to enter your password at this point.

Important note:  campus wireless access points will require your UIC netid and common password to authenticate. Beware of any access points prompting you for your password only (unaccompanied by your UIC netID).

 

Step 3 - Connect to AppleTV

Android users will need an app to connect to AppleTV. There are many of these, you will have to determine which is the best for your use. Note that the name of the Apple TV corresponds to the display you are using (COM-AppleTV-1, 2, 3, or 4). At some point in the connection process there will be a code displayed on the TV, type it in on your screen and tap OK.

How you use AirPlay Mirroring depends on what version of the iOS you're running. On iOS 5 or 6, double tap the iPhone or iPad's home button to bring up the fast app switcher. On iOS 7 or higher, swipe up to reveal Control Center.

On iOS 5 or 6, swipe the fast app switcher to the right. The first time you do this, you'll reveal the music controls and rotation lock button. From that screen, swipe to the right again. This will reveal the AirPlay button on the right (and a volume control on the left).

On iOS 7 or higher, you'll see the AirPlay button on the right-hand side of Control Center.

Tap the AirPlay button. In the list of devices that appears, tap the name of the Apple TV that corresponds to the display you are using (COM-AppleTV-1, 2, 3, or 4)

Move the Mirroring slider to On (in iOS 5 or 6) or to green (in iOS 7).

Tap Done.

There will be a code displayed on the TV, type it in on your screen and tap OK.

Your device is now connected to the Apple TV and mirroring will begin (sometimes there's a short delay before mirroring starts up).

Now when viewing content in Photos, Videos, or the Safari app, it will be streamed to your Apple TV.

  • To get full AirPlay features, make sure your AirPlay-enabled devices are using the latest software updates.
  • When AirPlay is enabled from Control Center, it will stay on until turned off. Therefore this setting will extend to all apps when used.
  • Not all apps or in-app content allow AirPlay.

 Learn more about using AirPlay Mirroring. If you are having issues with AirPlay Mirroring, see troubleshooting AirPlay and AirPlay Mirroring.

 

You can also AirPlay videos, music, or photos from a variety of different locations on your iOS device, including from within the Photos, Videos, Safari, and Music apps, or directly from recently used apps.

To AirPlay video or photo content to your Apple TV:

  1. Connect your iOS device and Apple TV to the same Wi-Fi network.
  2. Open either the Music, Videos, Safari, or Photos app on your device.
  3. Locate and tap the AirPlay icon Stream icon (if attempting to AirPlay video content from Safari or Videos, begin playback first).
  4. Select your Apple TV from the list of available devices that appears. There will be a code displayed on the TV, type it in on your screen and tap OK. You can now begin playback.

    Device menu

 

 You must have a valid ID to log into UIC Campus Wifi. If you are visiting campus, see instructions on http://accc.uic.edu/service/wireless/guest or see David Garcia for assistance.